PC / ABS with Nickel Plated Carbon Fiber

Molding Parameters for PC / ABS with Nickel Plated Carbon Fiber

ElectriPlast® EP-CF/PC/ABS
Core Fibers: Nickel Plated Carbon Fiber
Base Resin: Polycarbonate (PC) & Acrylonitrile Butadiene Styrene (ABS)

General Molding Set-Up Parameters for Electriplast

Resin Type PC/ABS
Grade 181-10-12
Electriplast P/N 8426365
Lot #:

Temperature

Nozzle Heater 505 °F
Front Zone 505 °F
Center Zone 500 °F
Rear Zone 485 °F

Time

T1 3 Inject
T2 2.4 Pack
T3 0 Hold
T4 30 Cool

Injection

Injection Speed 1.0 in/sec
1st Stage Pressure 2400 psi
Pack Pressure 500 psi
Back Pressure 300 psi
Screw RPM 125 rpm
Decomposition .5 inch

Mold Temperature

Mode Auto
Stationary 150 °F
Moveable 150 °F
Dry Temperature 180
Dry Time 4

These general molding parameters are provided as exemplary or baseline values for molding Electriplast. These values were established by molding 48g plaques using an 85 ton Milacron machine with a 4.4 oz shot capacity. Adjustments may be necessary for each individual machine and product.

Integral Technologies, Inc.. To the extent the user is entitled to disclose and distribute this document, the user may forward, distribute, and/or photocopy this copyrighted document only if unaltered and complete, including all of its headers, footers, disclaimers, and other information. You may not copy this document to a Web site. Integral Technologies does not guarantee the typical (or other) values. Analysis may be performed on representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, suitability, accuracy, reliability, or completeness of this information or the products, materials, or processes described. The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability for any loss, damage, or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in this document. There is no endorsement of any product or process, and we expressly disclaim any contrary implication.