post_title?>
ElectriPlast™ EP-CF/PC
Core Fibers: Nickel Plated Carbon Fiber
Base Resin: Polycarbonate (PC)
Revision A 5/13/2011 | MFG. License by: Jasper Rubber
Typical Properties 1
| Mechanical |
Nominal Value |
Unit |
Test Method |
| Tensile Strength, Break |
85 (12,289) |
MPa (psi) |
ASTM D 638 |
| Tensile Elongation, Break |
1 |
% |
ASTM D 638 |
| Tensile Modulus |
7,730 (1,121,068) |
MPa (psi) |
ASTM D 638 |
| Flexural Strength |
135 (19,507) |
MPa (psi) |
ASTM D 790 |
| Flexural Modulus |
6,725 (975,349) |
MPa (psi) |
ASTM D 790 |
|
|
|
|
| Impact |
Nominal Value |
Unit |
Test Method |
| Izod Impact, Notched, 23°C (73°F) |
57 (1) |
J/m (ft-lb/in) |
ASTM D 256 |
| Izod Impact, Unnotched, 23°C (73°F) |
200 (4) |
J/m (ft-lb/in) |
ASTM D 256 |
| Thermal |
Nominal Value |
Unit |
Test Method |
| HDT, 1.82 Mpa (264 psi) |
140 (284) |
°C (°F) |
ASTM D 648 |
|
|
|
|
| Physical |
Nominal Value |
Unit |
Test Method |
| Specific Gravity |
1.26 |
- |
ASTM D 792 |
|
|
|
|
| Flame Characteristics2 |
Nominal Value |
Unit |
Test Method |
| UL 94 (HB) Flame Class Rating |
No Burn |
mm/Min. |
UL 94 |
| UL 94 (V-2) Flame Class Rating |
Passed |
t1 or t2 <10 sec. |
UL 94 |
| Electrical |
Nominal Value |
Unit |
Test Method |
| Surface Resistance |
18 |
Ohm |
ESD STM 11.11 |
| Surface Resistivity |
191 |
Ohm/sq. |
ESD STM 11.11 |
| Volume Resistivity |
43 |
Ohm-cm |
ASTM D257 |
| Static Decay |
0.01 |
seconds |
FTMS 101C, 4046 |
| Shielding Effectiveness (30MHz to 1500Mhz) (0.125″/3.0mm Thickness) |
See Attachment |
dB |
ASTM D 4935 |
|
|
|
|
NOTES
1 Typical Properties: These are not to be construed as specifications. Variations within normal tolerances are possible.
2 This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
Integral Technologies, Inc.. To the extent the user is entitled to disclose and distribute this document, the user may forward, distribute, and/or photocopy this copyrighted document only if unaltered and complete, including all of its headers, footers, disclaimers, and other information. You may not copy this document to a Web site. Integral Technologies does not guarantee the typical (or other) values. Analysis may be performed on representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, suitability, accuracy, reliability, or completeness of this information or the products, materials, or processes described. The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability for any loss, damage, or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in this document. There is no endorsement of any product or process, and we expressly disclaim any contrary implication.
